What is the difference between hotel furniture and civilian furniture?

Many people do not know the nickname of hotel furniture, that is, business furniture; hotel furniture is more damaged than civilian furniture, the level of guests is different, the concept of love for furniture is also inconsistent, so the material requirements are very different! What is the difference between hotel furniture and civilian furniture? The author tells you in this article!

1,Hotel furniture is suitable for high-hardness, wear-resistant, scratch-resistant decorative furniture, room coffee table, writing desk, etc., customers often smoke here, accidentally burn the furniture surface, design should consider the fire protection of the countertop Performance, fire-retardant facing materials or glass can be used; and civilian furniture generally does not need to be considered. The fabric of the ring chair should be considered flame retardant, and the civilian furniture does not need to be considered.

What is the difference between hotel furniture and civilian furniture?

2, hotel business furniture waterproof and moisture-proof performance is better; and the hotel’s bathroom is mostly with the guest room, affected by wet towels, steam, seasonal changes, etc., will cause furniture deformation, edge-shedding, mildew, etc., affecting the appearance of furniture, destruction The image of the hotel directly affects the occupancy rate of the hotel; while the civilian furniture is relatively low.

What is the difference between hotel furniture and civilian furniture?

Hotel furniture maintenance is much more difficult than civilian use, because hotel furniture and bathing area are connected, so it is easier to wet, and civilian furniture is different, is their own furniture, family members will be relatively cherished.

What is the difference between hotel furniture and civilian furniture? In the design of hotel furniture material structure, the following six points should be considered. When designing the material structure of hotel furniture room furniture, we can start from the following aspects:

Quality of appearance of business furniture;

The appearance quality of the hotel furniture first requires the furniture countertop to be smooth, fine workmanship, delicate decoration, clear and beautiful texture. Room furniture usually uses particleboard, medium density fiberboard, blockboard, laminate, etc. as the substrate, using thin wood, wood veneer, and three plywood as cladding materials.

Different substrate and cladding materials have different material properties. Uncertainty about the properties of the material and the correct method of use often leads to warpage of the panel. The structural characteristics of the cladding material on the back side of the panel must be the same or similar, and the moisture content of the substrate is generally required to be 6-10%. The materials selected are as close as possible to the batch.

In the workshop processing, the time of loading and pressing machine should be shortened as much as possible, the material characteristics of different materials, the moisture content of different cladding materials, the different coating thickness, the pressing time and the pressure.

Structural strength of business furniture;

Most of the furniture in the guest room is fixed furniture. The general structure is mainly plate type, wood screws, hardware connectors and adhesives are used as the joint method. When using materials, pay attention to different material characteristics, such as particle board. The medium density board has poor nail holding power and should not be used in areas that require frequent activities or require strong nail holding power.

Such as the door hinge screw part, the rail bottom rail screw part, easy to loose to produce sound. Special attention should be paid to the hardware parts of the bed screen and the frame wall, or the wood should be used instead of the reinforcement. Nowadays, the wooden side is 45 degrees upside down.

What is the difference between hotel furniture and civilian furniture?

Cost of business furniture materials;

When the requirements of the use are also met, the material with low cost should be used as much as possible, and the use of the bulk material should be paid attention to while using the same small piece of material to comprehensively improve the utilization rate of the plate.

The room furniture is generally large in number, try to use the computer to reasonably discharge materials, and use large blocks and small blocks to reduce the material cost. Different structures should pay attention to the comparison of material costs.

Efficient production of business furniture;

In the case of the same material cost, the material is easy to process, and the process can save the process cost and improve the efficiency, especially in the vertical milling, boring and milling, engraving processes, the material is easy to be processed and cut, and is easy to be smooth and tidy.

Business furniture transportation installation;

The hotel floor is generally high, requiring furniture to be light and easy to transport. In particular, some connected bed backs, some extended writing desks, elevators can not be transported, freight elevators are generally removed during the installation of furniture, how to transport safely, from the weight and structure of the material must be specially considered.

Business furniture safety performance;

Generally, the hotel does not have a clear rule for the amount of formaldehyde free, but there are furniture fireproof requirements. In some cases, fireproof panels, anti-scalding paints, and flame retardant fabrics can be used in some parts of the hotel. High-end hotels even require the furniture to be fire-treated.

The above factors need to be considered in the practical application. The functional requirements of the hotel furniture require an interactive relationship with the reasonable material structure and workshop process arrangement of Dio Hotel Furniture.

It is recommended that the room furniture produced should meet the requirements of the hotel as much as possible, and can efficiently produce and reduce the cost. The professional processing technology and processing equipment are used to make the furniture meet the human-oriented comfort requirements of high-end hotels.